Expert Answers about Keystone Avalanche Fifth Wheel
- Do Trailer Brake Assemblies Have Front or Rear Axle Designations
- Brake assemblies like the set part # 23-458-459 can be used in a front or rear axle. You do have to match the correct left and right assemblies to the right side of the trailer but from front to back there is not difference.
view full answer... - Dimmer Switch for LED Lights in Trailer
- We do have dimmer switches that are compatible with LED lights, but do not carry any pulse drivers. For the dimmer you can use one of the following switches:
- RV LED Light Side-Slide Dimmer Switch - White # 37205-12325 or Black # 37205-12315
- LED Dimmer Rocker Switch - On/Off - White # 37215205 or Black # 37215225
I have added links to video reviews for you to check out as well.
view full answer... - Landing Gear With Dual Motors For Keystone 5th Wheel
- With connected landing gear you can't swap out the follow leg for a lead leg and motor to operate them independently. The gear wouldn't work and you wouldn't be able to orient the leg properly either. So you'd need to switch landing gear completely to an independent dual leg setup, the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010.
view full answer... - Does Solera 16 Foot Black Fade Awning Roller Assembly Work With Dometic 9100 Awning Arms
- The Solera RV Awning Roller Assembly - 16' Wide - Black Fade # LCV000211486 does not work with Dometic arms, so you'll need to replace those as well. To replace your Dometic 9100 awning arms, what you can use is a Solera conversion it, which is available in black or white. You just need to make sure you have 69 inches of space straight down from the awning rail. If so, you can use the following:
- Solera RV Awning Roller Assembly - 16' Wide - Black Fade # LCV000211486
- Solera 12V Electric...
view full answer... - Will the Valterra Waste Valve Body w/ Flexible Cable # TC372 Fit a 2014 Keystone Avalanche 361TG
- The Valterra Waste Valve Body w/ Flexible Cable # TC372 has a 3" diameter passage that is compatible with standard 3" sewage lines on RVs like your 2014 Keystone Avalanche 361TG.
This part is a replacement so if you don't already have a Valterra waste valve system then you would need to install install something like the Valterra Bladex Waste Valve # T40B which has 3" hub connectors on either end. If you needed one end to have a hub and the other end a spigot then we also have part # T40...
view full answer... - Determining If Reese Electric Landing Gear RP500708 Will Fit A 2011 Keystone Avalanche 330RE
- The Reese Electric 5th Wheel Landing Gear # RP500708 you were looking at may fit your 2011 Keystone Avalanche 5th Wheel Model 330RE, but the only way to be sure is measure the distance between the weld stops of your current landing gear.
The weld stops of the # RP500708 measure 15-1/2" apart inside to inside, and 17-1/2" apart outside to outside as you can see in the included diagram. As long as this matches your current landing gear this would be the correct replacement for you.
Having...
view full answer... - JT Strong Arm Stabilizer Kit Compatible with 2016 Keystone Sprinter 5th Wheel Trailer
- The JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs - 58" or More Between Landing Gear # LC191023 is designed for 5th wheel trailers. The # LC191024 for under 58 inches between landing gear is also for 5th wheel trailers. I've attached the installation instructions to assist.
You can use the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug for 5th Wheel RV Landing Gear # LC314592 to make a bracket for it. These lugs can be welded to round hydraulic foot pads popular...
view full answer... - Locking Pin Compatible with BWGNC4250 Gooseneck Coupler
- The B&W Defender Locking Gooseneck Coupler Inner Tube - Round - 2-5/16" Ball - 25,000 lbs # BWGNC4250 would require an incredible lifting height of the trailer steadily straight up to release a trailer when locked at the coupler to the hitch ball. That is the only reason it doesn't come with the locking pin you referenced.
The InfiniteRule Hitch Lock for Gen-Y Gooseneck Coupler w/ 4" Round Tube - Stainless Steel # 34065041 would be a great fit. It is a 3/4 inch diameter lock that has...
view full answer... - How to Tell if Spring is out of Alignment For Trailair Air Ride 5th Wheel Pin Box LC155943
- Thank you very much for your purchase from etrailer of the Trailair Air Ride 5th Wheel Pin Box # LC155943.
The pin box has a keyway where the spring bolt sits that you slide in where the air spring rests; it is hard to see the whole thing due to it being black, but I added a photo which shows where it is. You move it by hand, back and forth, with the spring fully deflated. If the air bag was tilted, this is indeed an indication the alignment may not have been fully in the hole.
view full answer... - How To Determine if the 5th Wheel Pin Box Cover Fits an LCI 438277 Road Armor King Pin
- I could not really find much with the information provided. The 438277 number and Road Armor pin box did not provide the needed information. What I can tell you is that the 5th Wheel Pin Box Cover # LC301458 fits a Lippert 1621 pin box.
If your LCI Lippert 438277 is a Lippert 1621, then this will work. I have provided a help article that goes over how to determine what your pin box is.
view full answer...
Go To Results